BIAB PNB 4 in 1 Gel is a strengthening gel, a base, a gel and a colour combined in a single bottle.
BIAB PNB 4-in-1 Gel is a strengthening gel applied directly to the natural nail to promote growth and reduce breakage. It requires neither a base coat nor a primer, as these are already included in the product. This makes BIAB PNB 4-in-1 Gel an indispensable tool for any nail technician, significantly reducing manicure time and cost savings.
05 Cotton Bloom , is a light and soft creamy white, reminiscent of the natural shade of cotton, and gives off a feeling of purity and natural harmony.
Rosy Mist is a delicate and subtle pink shade with slightly milky undertones, ideal for a French manicure. Its delicate hue leaves hands feeling fresh and well-groomed, highlighting the natural beauty of the nails.
04 Ivory Glow is a delicate ivory shade with a warm milky accent, creating a soft, natural color and adding a slight depth.
The powdery pink shade Fleur is associated with femininity and understated elegance. This hue makes an ideal everyday base or a perfect complement to a festive look. You can't go wrong with Fleur, as it's so versatile!
07 Warm Morning, a warm beige-brown shade with a slight caramel undertone, creates a soft and warm color sound, adding natural harmony and elegance to the image.
08 Dusty Rose is a powdery pink shade with light beige undertones. Its subtle depth exudes exquisite softness and great versatility, harmoniously complementing any look.
Benefits :
Save time and money: the product requires no base coat, primer, or other products, as it instantly strengthens the nail bed with color. It won't chip, gives nails natural stability, and promotes growth.
Suitable for thin nails.
A single product provides complete coverage.
100% gel system.
Suitable for all designs and lengths.
Unlike similar BIAB products containing acrylic acid, BIAB PNB 4 in 1 gel is completely hypoallergenic and safe for nail technicians and their clients.
Rapid and reliable polymerization is achieved thanks to the presence of several photoinitiators in the composition. The degree of polymerization will be more complete, thus guaranteeing a lower probability of allergic reactions due to under-polymerization of the molecules.
This material does not cause a strong burning sensation under the lamp, except on thin and sensitive nails.
Good adhesion, while retaining some elasticity.
Practical thixotropic consistency, which does not spread and combines perfectly with the nail technician's brush to create an impeccable architecture.
Resistant to LEDs and UV rays.
Lasts up to 4 weeks.
Technique for working with hard materials on natural nails:
Careful manicure and good preparation (preferably with a soft file, rather than a polisher);
The nails must be healthy and undamaged;
The thickness of the material at the end must be at least 1 mm;
On soft and elastic nails, file the nail from the inside to prevent delamination. The cut part of the material should be covered with a top coat without an adhesive layer.
Edge reinforcement technique using BIAB PNB 4-in-1 Gel:
Remove the old nail polish, do a manicure, without removing the length of the nail.
Prepare the nail plate for the polish, disinfect it with Nail Prep PNB.
Apply a very thin layer (base) of BIAB PNB 4 in 1 Gel by rubbing, then polymerize for 60 seconds.
Reinforce the free edges using the edge technique.
Apply the BIAB 4-in-1 PNB gel along the free edge, from stress zone #1 to stress zone #2, and over the penetration points. The tip of the nail should be 1.5 mm thick around the entire perimeter. Stress zones are the areas of the nail most subjected to pressure and load during regrowth.
Apply a layer of BIAB 4-in-1 PNB modeling compound (fill in the edges and create the desired shape). After drying, use the medium power setting. Cure for 90 to 120 seconds.
Remove the sticky layer with PNB Gel Cleanser and remove the lengths.
Cover with gel polish and create a design (optional).
Apply Express/Protect/Powder/Shock/Art Top PNB.
Important !
1* BIAB coating contains no harmful adhesives. Adhesion is achieved through the volume of the material in high-stress areas. Therefore, using the "side" technique is essential for good results without the need for a primer.
2* You can use the PNB BIAB 4 in 1 Gel with your usual bottle curing techniques, provided you use a primer and an elastic base.
Application method:
Remove the old nail polish, do a manicure, without removing the length of the nail.
Prepare the nail plate for varnishing, disinfect it with Nail Prep PNB.
Apply a very thin layer (base) of PNB BIAB 4 in 1 Gel by rubbing, then allow to polymerize for 60 seconds.
Reinforce the free edges using the "sides" technique.
Apply the BIAB 4-in-1 PNB gel along the free edge, from stress zone #1 to stress zone #2, and over the ingrown areas. The tip of the nail should be 1.5 mm thick around the entire perimeter. Stress zones are the areas of the nail most subjected to pressure and load during ingrown nails.
Apply a layer of BIAB 4-in-1 PNB modeling compound (fill in the edges and create the desired shape). After drying, use the medium power setting. Cure for 90 to 120 seconds.
Remove the sticky layer with PNB Gel Cleanser and remove the lengths.
Cover with gel polish and create a design (optional).
Apply Express/Protect/Powder/Schock/Art Top PNB.
